Table of Contents
Advertisement
ADDITIONAL SPECIFICATIONS
NEW VEHICLE BREAK-IN
The performance and long life of your Subaru are dependent on how you handle and care
for your Subaru while it is new.
Follow these instructions during the first 1,000 miles:
• Do not race the engine.
• Do not drive at one consistent engine or vehicle speed, either fast or slow.
• Avoid starting suddenly and rapid acceleration, except in an emergency.
• Avoid hard braking, except in an emergency.
ENGINE OIL
Use 0W-20 synthetic, with one of the follow specifications:
• API classification SN with the words "RESOURCE CONSERVING".
• ILSAC GF-5, which can be identified with the ILSAC certification mark (Starburst mark).
ENGINE OIL CAPACITY
2.0L Engine
5.7 US quarts (during oil and filter change)
There is approximately 1 quart between the low and
full level.
1
Full Level
2
Low Level
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Your Subaru has a Tire Pressure Monitoring System (TPMS).
Tire pressure specification is on the tire information placard located on the
driver's side door pillar.
30
Advertisement
Table of Contents
