Turning Off The Vehicle; Without Push-Button Ignition; With Push-Button Ignition Switch; Driverfocus - Subaru Outback 2020 Getting Started Manual

OPERATING THE VEHICLE

TURNING OFF THE VEHICLE

Without Push-button Ignition

To stop the engine:
1. Stop your Subaru completely.
2. Move the select lever to the "P" position.
3. Turn the ignition switch to "OFF".
NOTE: The windows will remain active for about 45 seconds and the SUBARU
STARLINK™ Multimedia system will remain on for about three minutes or until a door is
opened, whichever occurs first.
With Push-button Ignition Switch (if equipped)
To stop the engine:
1. Stop the vehicle completely.
2. Move the select lever to the "P" position.
3. Press the ignition switch.
NOTE: The windows will remain active for about 45 seconds and the SUBARU
STARLINK™ Multimedia system will remain on for about three minutes or until a door is
opened, whichever occurs first.

DRIVERFOCUS

The DriverFocus Distraction Mitigation System monitors possible cases when the driver is
not paying attention to the forward direction, and also recognizes individual users. This
system warns the driver of inattentive, drowsy driving, and can support safe and
comfortable driving by automatically retrieving the following settings.
• Driver Position
• Climate control setting
• Combination Meter Display Settings and other display settings in the instrument panel
Refer to the EyeSight Guide or Owner's Manual for further information on this system.
37