Firmware Software Updates - Subaru Outback 2020 Getting Started Manual

APPENDIX: HOW TO

FIRMWARE SOFTWARE UPDATES

For 11.6-inch Multimedia Plus and the 11.6-inch Multimedia Navigation systems only, the
system software may also be updated by you via a Wi-Fi connection or using the aha
application on your smartphone (depending on your smartphone communication and
transfer speed). The update process involves downloading and installing the software
update. Note that system functionality will be restricted during installation.
1. Connect to a Wi-Fi network or start the aha application on your smartphone.
2. Display the general setting screen by pressing the "Home" button, then select
"Settings", and finally "General".
3. Select "Software Update". If "Automatically Check for Updates" is turned on at the
general settings screen, an update check will be performed automatically before
proceeding to the next step. If "Automatically Download Updates" is turned on at the
general settings screen, the software update will be downloaded automatically before
proceeding to "Update Installation".
4. If the system is not set to "Automatically Check for Updates", select "Download Now"
to begin the download. The download status progress is displayed in the upper right of
the screen. If you need to stop the download and restart at a later time, select "Later" to
stop the process.
5. Select "Install Now" to start the installation process. The installation process will take
several minutes to complete. If you need to stop the installation process, press
"Cancel".
6. When the installation is complete, select "I Agree" on the confirmation message to
complete the update process. By selecting "I Agree", the system will restart
automatically.
122