Auto Mode - Subaru Outback 2020 Getting Started Manual

GETTING COMFORTABLE
16 Passengers's Climate Button: Touching
this button will bring up another window
that will allow you to adjust the
temperature, turn the heated/cooled
seats on or off and allow you to SYNC
(15) the passenger's side temp with the
driver's temperature.
17 Passenger Heated Seat Button:
Pushing this button will turn the
passenger heated seat on High. Pushing
it a second time will turn it on Medium,
third push for Low and fourth time to turn
Off.
18 Passenger Vented Seat Button:
Pushing this button will turn the
passenger vented seat on High. Pushing
it a second time will turn it on Medium,
third push for Low and fourth time to turn
Off.

Auto Mode

When using automatic mode, the fan speed, airflow distribution, air-inlet control and air
conditioning compressor are controlled automatically. To activate:
1. Press the "AUTO" button. The "FULL AUTO" indicator light illuminates on the climate
control display.
2. Set the preferred temperature using the temperature control arrows. Another method
would be to touch the climate control button, then use the touch buttons or slide bar to
adjust the temperature.
If you operate any of the buttons other than "ON/OFF", rear window defogger, front
defroster, "SYNC", or the temperature buttons, the "FULL" indicator light will turn off, the
"Auto" will display in the screen button. You can then manually control the system as
desired. Press the "AUTO" button to change back to "FULL AUTO" mode if the
customizable button is programmed to "Auto".
20