Memory Height - Subaru Outback 2020 Getting Started Manual

Memory Height

You can set where the rear gate stops when it
opens. To set the height:
1 In the Center Information Display (CID)
press the "Home" Button.
2 Select "Settings".
3 Select "Car".
4 Select "Power Rear Gate".
5 Turn on "Power Rear Gate Memory".
6 Now open the power rear gate and press
and hold the switch on the rear gate
when it reaches the desired height. You
will hear 2 beeps to indicate the memory
height has been set.
When the "Power Rear Gate Memory" is set to
On in the Center Information Display (CID), the
rear gate will stop at the set memory height
when you use any of the power rear gate switches.
NOTE: To adjust the memory height, once the rear gate stops, move it to the desired
height and press and hold the Power Rear Gate Switch until you hear the 2 beeps.
PASSENGER/CARGO AREAS
43