Rear Window Wiper; Instrument Panel Switches (Lower Left) - Subaru Outback 2020 Getting Started Manual

REAR WINDOW WIPER

Rotate the end of the lever up one position for
intermittent, or two positions for continuous
wipe.
When the lever in is the intermittent position,
the wiper operates at intervals corresponding
with vehicle speed. When you move the select
lever to the "R" position, the wiper will switch
to continuous operation. It will return to
intermittent when you move the select lever
out of "R".
Rotate the dial up from the continuous wipe position or down from the ON position to
spray washer fluid. The washer will spray until you release the dial, then return to the
previous position and resume continue operation.

INSTRUMENT PANEL SWITCHES (LOWER LEFT)

The instrument panel contains these switches:
1 Power rear gate release switch (p. 42)
2 Illumination Brightness (p. 25)
3 Hands-free power rear gate off switch (p. 6)
CONTROLS
27