GETTING COMFORTABLE
SEATING
Manual Seats
1
Forward/Backward: Pull the lever below the
seat up and slide the seat forward or backward.
Release the lever and make sure the seat is
locked into place.
2
Seat Height (Driver's Seat): Pulling up or
pushing down on the lever will raise or lower the
seat cushion.
3
Recline Seatback: Pull the lever up to adjust the seatback to the desired position.
Release the lever and make sure the seat is locked into place.
Power Driver's Seat (if equipped)
1
Forward/Backward and Height: Moving
the switch forward or backward will
adjust the seat in that direction. Pulling
up or pushing down on the front or back
of the switch will adjust the angle of the
seat cushion. Pulling up or pushing down
the entire switch will adjust the height of
the seat cushion.
2
Recline Seatback: Moving the switch
forward or backward will adjust the angle
of the seatback.
3
Lumbar Support (if equipped): Pressing
the front of the switch will increase
support. Pressing the rear of the switch
will decrease support.
4
Thigh Extension (if equipped): Pull up
on the lever below the seat cushion to
adjust the length.
10