Table of Contents
Advertisement
HOW TO APPENDIX
FIRMWARE AND SOFTWARE UPDATES
Software updates provide enhancements to the system, such as new features, added
security, and upgraded functions. You can ask your preferred Subaru retailer to check for
and perform a full update to the system software. Please ask your preferred Subaru retailer
for specific details on update content.
NOTE: System functionality will be restricted during installation, and you may need to
reset radio station presets and volume settings after the update process. Set your clock to
"Auto" (see page 86) before updating the software.
To update the software via Wi-Fi:
1. Connect to a Wi-Fi network (see page 98).
2. Display the general setting screen by pressing the "Home" button, then select
"Settings", and finally "General".
3. Select "Software Update", select "Update", and then select "Check for Updates"
• If "Automatically Check for Updates" is enabled, an update check will be performed
automatically before proceeding to the next step.
• If "Automatically Download Updates" is enabled, available software updates will be
downloaded automatically.
4. Select "Download Now" to begin the download. The download status progress is
displayed in the upper right of the screen. If you need to stop the download and restart
at a later time, select "Cancel" to stop the process.
5. Select "Install Now" to start the installation process. The installation process will take
several minutes to complete.
6. When the installation is complete, select "OK" on the confirmation message to
complete the update process.
7. Turn the ignition to the "OFF" position and open and close the driver's door. After about
5 minutes, restart the engine, and the software installation will be applied.
100
Advertisement
Table of Contents
