Moving Recorded Tracks; Move Function - Sony CMT-C7NT Operating Instructions Manual

Erasing recordings (continued)
5
While monitoring the sound, press .
or > repeatedly to find the starting
point of the portion to be erased (point
A).
You can shift the starting point by 1/86
second (1 frame) intervals*.
To shift the point by second or minute
intervals, press m or M so that second
or minute flashes, then press . or >.
* You can shift the starting point by 2-frame
intervals (in Monaural mode and LP2 Stereo
mode) or by 4-frame intervals (in LP4 Stereo
mode).
6
Repeat step 5 until point A is played
correctly.
7
Press ENTER/YES on the remote if
point A is correct.
"Point B set" appears and play for setting
the ending point of the portion to be erased
(point B) starts.
8
Continue play until the deck reaches
point B, then press ENTER/YES on the
remote.
"A-B Ers" and "Point B ok?" appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
9
Press . or > repeatedly to find
point B.
The procedure is the same as step 5.
10
Press ENTER/YES on the remote if
point B is correct.
"Complete!" appears.
36

Moving recorded tracks

— Move Function

You can use this function to change the order
of any track on the disc. When you move
tracks, the tracks are automatically
renumbered.
Example: Moving track 3 to position 2.
Track
number
1 2
Original
A B
tracks
2
1
After
A
MOVE
1
Press FUNCTION on the remote
repeatedly until "MD" appears in the
display.
2
Press MENU/NO on the remote to
display "Edit Menu."
3
Press . or > repeatedly until
"Move?" appears, and then press
ENTER/YES on the remote.
4
Press . or > repeatedly until the
desired track number to move appears,
and then press ENTER/YES on the
remote.
3 4
C D
3 4
C B D