Listening To The Radio; Preset Tuning - Sony CMT-C7NT Operating Instructions Manual

Listening to the radio

— Preset Tuning

Presetting radio stations in the system's
memory in advance make it easy to tune in
those stations later (see "Presetting radio
stations" on page 42).
1
Press FUNCTION (or TUNER BAND on
the remote) repeatedly to select FM or
AM.
2
Press TUNING MODE on the remote
repeatedly until "PRESET" appears in
the display.
3
Press TUNING + or – repeatedly to
select the desired station .
The preset number and the frequency (or
1
station name* or RDS station name*
appear.
1
* The station name appears only if you have
labeled the station (see page 44).
2
* European model only
To turn off the radio
Press ?/1.
To enter preset number over 10
(on the remote only)
1
Press >10.
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter preset number 20, press >10, then 2 and
10/0.
To tune in a non-preset radio station
• In step 2, press TUNING MODE on the
remote repeatedly until "MANUAL" appears
in the display, and then press TUNING + or
– repeatedly to tune in the desired station
(Manual Tuning).
• In step 2, press TUNING MODE on the
remote repeatedly until "AUTO" appears in
the display, and then press TUNING + or
–. The frequency indication changes and the
scanning stops when the system tunes in a
station (Automatic Tuning).
To cancel Automatic Tuning
Press TUNING MODE on the remote.
Tips
• If there is static during an FM broadcast, press FM
MODE on the remote repeatedly until "MONO"
appears in the display. The broadcast will no longer
2
)
be in stereo, but the reception will improve.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
43