Table of Contents
Advertisement
Starting recording with 6 seconds of
prestored audio data (continued)
To stop Time Machine Recording
Press x.
Note
The MD deck starts storing audio data when the deck
stands by for recording in step 3 and you start playing
the source. If less than 6 seconds have passed when
you press ENTER/YES on the remote, Time Machine
Recording starts with less than 6 seconds of audio
data.
22
Recording tips
— Recording for long times/Marking
track numbers/Smart space/
Adjusting the recording level
Recording for long times
In addition to normal stereo recording, this
system has two long time modes: LP2 and LP4.
When recording in LP2 mode, you can record 2
times the normal recordable time, and in LP4
mode, you can record 4 times the normal
recordable time. In addition, the recordable
time for monaural recording is approximately
double the stereo recording time.
LP4 Stereo mode (4 long time recording
mode) achieves a long stereo recording time by
use of a special compression system. When
placing emphasis on sound quality, Stereo
recording or LP2 Stereo recording (2 long
time recording mode) is recommended.
Note
MDs recorded in MDLP (LP2 or LP4) mode cannot
be played back on a system that does not support
MDLP mode. In addition, you cannot perform S.F
Edit, etc., for MDs recorded in MDLP mode.
1
Load a recordable MD.
2
Press FUNCTION repeatedly until "MD"
appears in the display.
3
Press MENU/NO on the remote.
4
Press . or > repeatedly until
"Setup?" appears in the display, and
then press ENTER/YES on the remote.
5
Press . or > repeatedly until
"STEREO REC," "MONO REC," "LP2
REC," or "LP4 REC" appears, and then
press ENTER/YES on the remote.
Hide quick links:
Advertisement
Table of Contents
