Tape - Play; Loading A Tape; Playing A Tape - Sony CHC-CL3 Operating Instructions Manual

Tape – Play

Loading a tape

1
Open the lid with your hand and insert
a tape.
With the side
you want to
play facing up
2
Close the lid with your hand.
To remove the tape, lift up the tape from the
side as shown in the illustration.

Playing a tape

1
Press FUNCTION repeatedly to switch
the function to TAPE.
2
Press PLAY MODE/DIRECTION
repeatedly until g appears to play one
side or h (or j *
3
Press TAPE nN (or N on the
remote).
Press TAPE nN (or N on the remote)
again to play the bottom side.
1
* The tape deck stops automatically after repeating
the sequence five times.
1
) to play both sides.
To Do this
Press x.
Stop play
Press X on the remote. Press again
Pause
to resume play.
Find the Turn ./> clockwise (or
press > on the remote) for the
succeeding track
2
(AMS* ) top side during playback.
Turn ./> counterclockwise
(or press . on the remote) for
the bottom side during playback.
Turn ./> counterclockwise
Find the
(or press . on the remote) for
preceding track
2
(AMS* ) the top side during playback.
Turn ./> clockwise (or
press > on the remote) for the
bottom side during playback.
Fast-forward or Press m or M.
rewind
2
* The Automatic Music Sensor (AMS) feature
detects a blank space of more than four seconds
between tracks to locate tracks quickly.
Tip
The deck cannot identify the tape type, such as TYPE
I (normal), TYPE II (CrO
2
Notes
• If you do not close the lid, you cannot start playing
the tape.
• If you open the lid while playing a tape, the deck
stops playing.
• The AMS feature may not work in the following
cases:
– the blank space between tracks is four seconds
or less.
– the TV is too close to the system.
) or TYPE IV (metal).
17