Tape - Play; Loading A Tape; Playing A Tape - Sony MHC-GN100D Operating Instructions Manual

Tape – Play

Loading a tape

1
Press Z A or Z B on the unit.
2
Load a tape into deck A or B.
With the side
you want to
play/record
facing
forward
GB
46

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press FUNCTION +/– (or TAPE A/B on
the unit) repeatedly until "TAPE A" or
"TAPE B" appears in the display.
3
Press DIRECTION repeatedly to select
"g" to play one side, "j"
both sides or "RELAY"
to play both decks in succession.
4
Press nN.
The tape starts playing.
Press nN again to play the reverse side.
Front side indicator
*1
The tape deck stops automatically after
repeating the sequence five times.
*2
Relay Play follows this cyclic sequence up to
five times, then stops:
Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse
side)
Other operations
To Do this
Stop playback Press x.
Press X. Press X again to resume
Pause playback
playback.
Press m or M (or turn
Fast-forward or
–m M+ clockwise or
rewind
counterclockwise on the unit).
Remove a tape Press
when playback is stopped.
*1
to play
*2
(Relay Play)
Tape presence indicator
Y j Y
A B
EFFECT
GROOVE
Reverse side indicator
Z Z
A or B on the unit