Labeling The Preset Stations; Station Name; Using The Radio Data System (Rds) - Sony CHC-CL3 Operating Instructions Manual

Labeling the preset
stations

— Station Name

You can label each preset station with up to
12 characters (Station Name).
1
Tune the desired station you want to
label (see "Listening to the radio" on
page 15).
2
Follow the same procedures as from
step 3 to 8 of "Labeling a CD" on page
12.
To erase the name
1
Tune the station.
2
Press NAME EDIT/CHARACTER on the
remote.
3
Press CLEAR on the remote repeatedly to
erase the name.
4
Press ENTER/YES on the remote.
16
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name display and
location of stations by program type. RDS is
available only on FM stations.*
Note
RDS may not work properly if the station you tuned
in is not transmitting the RDS signal properly or if the
signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.