Optional Components; Hooking Up The Optional Components - Sony CHC-CL3 Operating Instructions Manual

7
Turn ./> (or press . or > on
the remote) to select the desired sound
source.
The indication changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8
Press ENTER/YES on the remote.
The start time, the stop time, and the sound
source appear in turn, before the original
display returns.
9
Press ?/1 to turn off the system.
To Do this
Check the setting Press CLOCK/TIMER
SELECT on the remote, then
turn ./> (or press
. or > on the remote)
until "DAILY SELECT?"
appears. Then, press ENTER/
YES on the remote.
Change the setting Start over from step 1.
Cancel the timer Press CLOCK/TIMER
SELECT on the remote, then
turn ./> (or press
. or > on the remote)
until "TIMER OFF" appears.
Then, press ENTER/YES on
the remote.
Notes
• If the system is on about 30 seconds before the
preset time, the Daily Timer will not be activated.
• Do not operate the system from the time the system
turns on until the play starts (about 30 seconds
before the preset time).

Optional Components

Hooking up the optional
components
You can connect a digital or an analog
component to this system.
To the audio output jacks of an analog component
To the digital input jack of a digital component
continued
23