10 Configuration; Outdoor Unit; Overview: Configuration - Daikin Altherma EJHA04AAV3 Installer's Reference Manual

10 Configuration

10 Configuration
10.1

Outdoor unit

10.1.1

Overview: Configuration

This chapter describes what you have to do and know to configure
the system after it is installed.
INFORMATION
Gas boiler. Depending on the installed gas boiler, settings
will be visible/invisible.
▪ By default, only the settings applicable for the third-
party gas boiler are displayed.
▪ When the unit detects communication from the
EHY2KOMB28+32AA gas boiler, all settings applicable
for the EHY2KOMB28+32AA
automatically displayed.
Why
If you do NOT configure the system correctly, it might NOT work as
expected. The configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪ First time – Quick wizard. When you turn ON the user interface
for the first time (via the outdoor unit), a quick wizard starts to help
you configure the system.
▪ Afterwards. If necessary, you can make changes to the
configuration afterwards.
INFORMATION
When the installer settings are changed, the user interface
will request to confirm. When confirmed, the screen will
shortly turn OFF and "busy" will be displayed for several
seconds.
Accessing settings – Legend for tables
You can access the installer settings using two different methods.
However, NOT all settings are accessible via both methods. If so,
the corresponding table columns in this chapter are set to N/A (not
applicable).
Method
Accessing settings via the breadcrumb in the
menu structure.
Accessing settings via the code in the
overview settings.
See also:
▪ "To access the installer settings" on page 56
▪ "10.1.5 Menu structure: Overview installer settings" on page 71
To access the most used commands
To access the installer settings
1 Set the user permission level to Installer.
2 Go to [A]: > Installer settings.
To access the overview settings
1 Set the user permission level to Installer.
2 Go to [A.8]: > Installer settings > Overview settings.
Installer reference guide
56
To set the user permission level to Installer
1 Set the user permission level to Adv. end user.
2 Go to [6.4]:
3 Press
Result:
4 If you do NOT press any button for more than 1 hour or press
switches back to End user.
To set the user permission level to Advanced end user
1 Go to the main menu or any of its submenus:
2 Press
Result: The user permission level switches to Adv. end user.
Additional information is displayed and "+" is added to the menu title.
The user permission level will stay in Adv. end user until set
otherwise.
gas boiler are
To set the user permission level to End user
1 Press
Result: The user permission level switches to End user. The user
interface will return to the default home screen.
To modify an overview setting
Example: Modify [1‑01] from 15 to 20.
1 Go to [A.8]:
2 Go to the corresponding screen of the first part of the setting by
using the
00
04
08
0c
Confirm
3 Go to the corresponding second part of the setting by using the
Column in tables
00
#
04
08
Code
0c
Confirm
Result: The value to be modified is now highlighted.
4 Modify the value by using the
00
04
08
0c
Confirm
5 Repeat previous steps if you have to modify other settings.
6 Push
7 At installer settings menu, press
> Information > User permission level.
for more than 4 seconds.
is displayed on the home pages.
again for more than 4 seconds, the installer permission level
for more than 4 seconds.
for more than 4 seconds.
> Installer settings > Overview settings.
and button.
INFORMATION
An additional 0-digit is added to the first part of the setting
when you access the codes in the overview settings.
Example: [1‑01]: "1" will result in "01".
Overview settings
01
00 01 15 02 00 03 00
05 06 07
09 0a 0b
0d 0e 0f
Adjust Scroll
and button.
Overview settings
01
00 01 15 02 00 03 00
05 06 07
09 0a 0b
0d 0e 0f
Adjust Scroll
and
Overview settings
01
00 01 20 02 00 03 00
05 06 07
09 0a 0b
0d 0e 0f
Adjust Scroll
to confirm the modification of the parameter.
EJHA04AAV3 + EHY2KOMB28+32AA
Daikin Altherma Hybrid hydrosplit heat pump
.
button.
to confirm the settings.
4P531180-1 – 2018.06