Daikin Altherma EJHA04AAV3 Installer's Reference Manual page 84

14 Maintenance and service
3 Close the gas tap.
4 Remove the front panel.
5 Wait until the appliance has cooled down.
6 Unscrew the coupling nut at the base of the flue pipe by turning
counterclockwise.
7 Slide the flue pipe upwards by turning it clockwise until the
bottom of the pipe is above the condensate drain pan
connection.
8 Pull the bottom of the pipe forwards and remove the pipe
downwards by turning the pipe alternately clockwise and
counterclockwise.
Installer reference guide
84
9 Lift the condensate drain pan on the left-hand side from the
connection to the condensate trap.
10 Turn it to the right with the condensate trap connection over the
edge of the base tray.
Daikin Altherma Hybrid hydrosplit heat pump
EJHA04AAV3 + EHY2KOMB28+32AA
4P531180-1 – 2018.06