Operating Instructions; Filling The Main Tank; Filling The Flush Tanks; Standard Sprayer Plumbing Diagram - Hardi MEGA 230 Operator's Manual

6.0 OPERATING INSTRUCTIONS

6.1 Filling the Main Tank

Water is filled into the tank by removing the tank lid located at right hand
side of sprayer tank. It is recommended to use water as clean as possible
for spraying purposes. Always fill water through the strainer basket to
prevent foreign particles from entering the tank.
WARNING: Do not let the filling hose enter the tank. Keep it outside
the tank, pointing towards the filling
hole (fig. 17). If the hose is lead into
the tank and the water pressure
drops at the water supply plant,
chemicals may be syphoned back
and contaminate the water supply
lines, plant and well.
Fig. 17
6.2 Filling the Flush Tanks (if fitted)
Remove the tank lid, fill with clean water and replace lid.
6.3 Standard Sprayer Plumbing Diagram (Shown with
TM
optional Chemical Filler, Flush & Rinse System and
Agitation shutoff valve)
Review and study the following diagram (Fig. 18). Following the flow
through the system will help you better understand the various functions
of the sprayer system.
Fig. 18
HARDI MEGA 230 / 350 CENTRIFUGAL OPERATORS MANUAL
30