Handling Chemical Products Safely - Hardi MEGA 230 Operator's Manual

2.2 Operating The Sprayer Safely (cont'd)
15. Understand service procedures before undertaking any
maintenance. Never lubricate, service, or adjust the machine while
its moving. Securely support any components before working on
them.
16. Keep all parts in good condition and properly installed. Fix damaged
parts immediately. Replace worn or broken parts. Remove excessive
buildup of grease, oil, or debri.

2.3 Handling Chemical Products Safely

1. Direct exposure to hazardous chemicals can cause serious injury.
These chemicals can include lubricants, coolants, paints, adhesives
and agricultural chemicals. Material safety data sheets (M.S.D.S.) are
available for all hazardous chemicals which inform the user of specific
details including, physical and health hazards, safety procedures, and
emergency response techniques.
2. Protective clothing such as rubber gloves, goggles, coveralls and
respirator must be worn while handling chemicals. All protective
clothing should be kept in excellent condition and cleaned regularly or
discarded.
3. If chemicals come in contact with any exposed skin areas, wash
immediately with clean water and detergent. Never place nozzle tips
or any other components that have been exposed to chemicals to lips
to blow out obstructions. Use a soft brush to clean spray nozzles.
4. Dedicate an area to fill, flush, calibrate and decontaminate sprayer
where chemicals will not drift or run off to contaminate people,
animals, vegetation, water supply, etc. Locate this area where there is
virtually no chance of children being in contact with this residue.
5. Decontaminate equipment used in mixing, transferring, and applying
chemicals after use. Follow the instructions on the chemical label for
the correct procedure required. Wash spray residue from outside of
the sprayer to prevent corrosion.
HARDI MEGA 230 / 350 CENTRIFUGAL OPERATORS MANUAL
11