Description
2.2 Connection options and supported transponders
Interface-specific programming
On the Siemens support page "Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/view/109741590)" you will find functions for
accessing the readers in form of DLL files as well as a demo application. With operation via
the USB interface, you can implement user identification for access to your own applications
quickly and simply with the help of the DLL files. To do this, the reader reads out the serial
numbers of MIFARE, ISO 15693 and LEGIC transponders. Depending on the card type, the
serial number can be 4, 7 or 10 bytes (MIFARE / ISO 14443), 8 bytes (ISO 15693) or 4, 7 or
8 bytes (LEGIC) long.
If the SIMATIC RF1070R reader is operated via the RS232 interface, programming takes
place over the freeport protocol.
2.2
Connection options and supported transponders
Depending on the interface protocol used, the readers can be used for various applications.
The following table provides an overview of the possible uses of the readers.
Table 2- 1
Interface/Protocol
application
Connector
Cable
8
Possible uses
SIMATIC RF1060R
USB
PM LOGON,
demo application
SIMATIC Panel, PC
Included in the scope of
delivery
SIMATIC RF1070R
USB
PM LOGON,
demo application
SIMATIC Panel, PC
Included in the scope of
delivery
Operating Instructions, 02/2019, C79000-G8976-C432-04
RS232 Freeport
STEP 7 (TIA Portal)
RF170C
e.g. ET
200SP
6GT2891-
6GT2891-
4UH20
2UH30
SIMATIC RF1000