Siemens SIMATIC RF1000 Series Operating Instructions Manual page 16

Installing and commissioning
Configuration card and VHL file
You transfer the reader configurations (e.g. memory areas, addresses, passwords, write
permissions, etc.) to the reader using the configuration card (6GT2300-0CC00-0AX0) or an
identification card (LEGIC). These configurations are saved as VHL file in the reader.
Multiple configurations (VHL files) of a configuration card can be stored on a reader.
To change the configuration of a reader with the configuration card, you must set the
"AllowConfig = true" tag when calling the function "vhl_select()" and then hold the card into
the antenna field of the reader. After you have changed the configuration, the reader
automatically restarts. After the restart you must set the "AllowConfig" tag back to "false".
The configuration card is blank upon delivery. If you prefer to receive the configuration cards
with preconfigured, customer-specific configurations, please contact Service & Support
(services.ci.industry@siemens.com).
16
Operating Instructions, 02/2019, C79000-G8976-C432-04
SIMATIC RF1000