Syscmd_Get_Info - Siemens SIMATIC RF1000 Series Operating Instructions Manual

Table 6- 4
Parameter
syscmd_reset
Return value
6.2.1.5

syscmd_get_info

The function reads out information about the firmware of the reader.
The value read out contains information on the type of firmware, the version and the serial
number of the reader.
Function call
int
syscmd_get_info(
int Handle,
char * fws,
int * Status
);
Table 6- 5
Parameter
syscmd_get_info
Return value
SIMATIC RF1000
Operating Instructions, 02/2019, C79000-G8976-C432-04
Description of the parameters
Description
The parameter restarts the reader.
Handle The session key returned by the function "brp_open_usb_session".
Status OK
BRP_OK
•
You will find more information on return values in the section "Return values
(Page 31)".
Description of the parameters
Description
The parameter reads out information about the firmware of the reader.
Handle The session key returned by the function "brp_open_usb_session".
fws This parameter contains information on the type of firmware, the version
and the serial number of the reader.
Format: xx...xx r.rr.rr dd/dd/dd ssssssss
xx...xx
r.rr.rr
dd/dd/dd
ssssssss
Status OK
BRP_OK
•
You will find more information on return values in the section "Return val-
ues (Page 31)".
6.2 Programming via USB interface
Firmware type
Version (major release, minor release, build ID)
Date of the version
Serial number of the reader
Programming
21