Snom M45R SC Quick Installation Manual page 14

Sip dect rugged handset
Table of Contents

Advertisement

IMPORTANT INFORMATION
Use only the power adapter supplied with this product (Ten Pao,
model number S003AKU0600040). To order a replacement power
adapter, visit our website at
The power adapter is intended to be correctly oriented in a vertical or
floor mount position.
The prongs are not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
Switching on the handset
The handset battery is preinstalled. When you unpack the handset
form the delivery box, you must switch on the handset using the
provided key. Follow the steps below. You only have to do this once.
To switch on the handset:
1. Insert the provided key into the hole at the bottom rear of the
handset.
2. Gently push the pin into the hole until you hear a click.
3. Remove the pin.
Your handset will power on after five seconds.
From now on, you can turn your handset off/on by pressing and
holding the OFF/CANCEL
snomamericas.com
button on the handset.
14
6
6
.
7
7
8
8
9
9
10
10

Advertisement

Table of Contents
loading

Table of Contents