Sony BDV-IT1000 Operating Instructions Manual page 71

12
Press X/x to select the setting for the
Control for HDMI function.
Easy Setup
- Control for HDMI
You can operate this unit in conjunction with a TV connected by HDMI.
Check your TV settings when using this function.
On
Select [On] to use the [Control for HDMI]
function (page 105) when connecting Sony
components that are compatible with the
Control for HDMI function.
If you do not use the [Control for HDMI]
function, select [Off].
13
Press or c.
The Setup Display for [BD Internet
Connection] appears.
14
Press X/x to select the setting for the
BD Internet connections.
Select [Allow] to allow Internet
connections.
If you do not allow the connections, select
[Do not allow].
15
Press or c.
The Setup Display for [Standby Mode]
appears.
16
Press X/x to select the standby mode.
You can operate the player quickly after
turning on this function.
Select [Quick Start] if you want to shorten
the startup time from the standby mode. The
default setting is [Normal].
Note
• Quick Start mode will increase electricity
consumption and activate the fan in the standby
mode.
17
Press or c.
The Setup Display for [Auto Calibration]
appears.
18
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
COMPONENT VIDEO OUT VIDEO OUT
P / P /
Y B R
C C
B R
VIDEO S-VIDEO
Y P B / C B P R / C R
SAT/CABLE
LAN(100)
COMPONENT VIDEO IN
DC5V 500mA MAX
EXTERNAL
SPEAKER
FRONT FRONT
CENTER WOOFER
R L
L
A . C A
M I C
C 2
E C M -A
Calibration mic
IR REMOTE
TV SAT/CABLE DIGITAL
OPTICAL
IN
OUT IN COAXIAL
IN 1 IN 2 OUT
EZW-RT10
HDMI
ANTENNA
75 COAXIAL
FM
TV R L A.CAL
MIC
AUDIO IN
DMPORT
ECM-AC2
DC5V
700mA
R L
MAX
AM
AUDIO
VIDEO SAT/CABLE IN
Ex. BDV-IT1000
71
GB