To cancel pairing
Perform the ID setting of the unit according to
the procedure of "To set the ID of the unit"
(page 99). If you select a new ID (you can select
the same ID as before), pairing is canceled.
If sound transmission is
unstable
For the surround amplifier
For the S-AIR receiver
If you use multiple wireless systems which
sharing the 2.4 GHz band, such as wireless LAN
or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, the transmission may be
improved by changing the following [S-AIR RF
Change] setting.
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select
3
Press X/x to select [System Settings],
then press
4
Press X/x to select [S-AIR RF Change],
then press
5
Press X/x to select the desired setting.
• [Auto]: Normally select this. The system
changes the setting to [On] or [Off]
automatically.
• [On]: The system transmits sound by
searching the better channel for
transmitting.
• [Off]: The system transmits sound by
fixing the channel for transmitting.
6
Press
The setting is made.
7
When you set to [Off], select the ID so
that sound transmission is most stable
(page 99).
104
GB
[Setup].
.
.
.
Note
• In most cases, you will not need to change this
setting.
• If [S-AIR RF Change] is set to [Off], transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for Wi-Fi
channel 1
– S-AIR ID B: equivalent channel for Wi-Fi
channel 6
– S-AIR ID C: equivalent channel for Wi-Fi
channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).