Sony BDV-IT1000 Operating Instructions Manual page 35

7
Attach the baffle cover to the speaker.
Use the baffle cover (short) for the front speaker, baffle cover (long) for the surround speaker.
Press the ends of the baffle cover over the pin(s), then press down to flush fit the speaker front.
Front speaker
Baffle cover (short)
Note
• When assembling, take care not to touch the speaker unit.
8
Attach the grille to the speaker.
Be careful with the orientation of the grille. The "SONY" logo should be at the bottom of the grille.
Front speaker
Grille
"SONY" mark
Note
• When assembling, take care not to touch the speaker unit.
• Be sure to use the speakers with their grilles attached.
• Do not push on the attached grille. It may cause damage to the speaker unit.
Surround speaker
"J" mark
Baffle cover (long)
Surround speaker
Grille
"SONY" mark
35
GB