Sony BDV-IT1000 Operating Instructions Manual page 49

BDV-IS1000
1
Prepare screws (not supplied) that are suitable for the holes of the bracket.
2
Secure the bracket to the wall using hole 1.
Tip
• To prevent the speaker from rotating, use the hole 2, too.
3
Remove the rear cap using the wrench (supplied), and remove the speaker pedestal
using a screwdriver (+) (not supplied).
Note
• The removed screw is used in a later step. Be sure not to lose the screw.
1
2
3 4
Wrench (supplied)
Rear cap
Screw
49
GB