Sony BDV-IT1000 Operating Instructions Manual page 137

Symptom
Bonus contents or other data that
are contained in a BD-ROM
cannot be played.
A message indicating that the
local storage does not have
enough space appears on the
screen.
The unit does not work and
"CHILD LOCK" appears in the
front panel display when you
press any button on the unit.
The S-AIR function
Symptom
S-AIR connection is not
established (sound transmission
is not established), e.g., the
indicator of the S-AIR sub unit
does the following:
• Turns off.
• Flashes.
• Turns red.
No sound is heard from the
S-AIR sub unit.
There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m away from the unit.
Remedy
• Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
re-insert the external memory (page 64). 4 Turn the system on. 5 Check that
the EXTERNAL indicator lights up in the front panel display. 6 Insert the BD-
ROM with BonusView/BD-Live.
• Delete unnecessary data in the external memory (page 78).
• Set the child lock function to off (page 116).
Remedy
• If you use another S-AIR main unit, place it more than 8 m away from the unit.
• Confirm the ID of the unit and S-AIR sub unit (page 99).
• You performed pairing the unit and another S-AIR sub unit. Perform pairing of
the desired S-AIR sub unit (page 102).
• The unit is paired to another S-AIR sub unit. To cancel pairing, reset the ID of
the unit and S-AIR sub unit (page 99).
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
• If you use another S-AIR main unit, place it more than 8 m away from the unit.
• Confirm the ID of the unit and S-AIR sub unit (page 99).
• Confirm the pairing setting (page 102).
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the [S-AIR RF Change] setting (page 104).
• Change the ID settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn on them.
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the [S-AIR RF Change] setting (page 104).
• Change the ID settings of the S-AIR main unit and S-AIR sub unit.
137
GB