Calibrating The Appropriate Settings Automatically - Sony BDV-IT1000 Operating Instructions Manual

Calibrating the
Appropriate Settings
Automatically
[Auto Calibration]
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
Note
• The system outputs a loud test sound when [Auto
Calibration] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
• Make sure that the headphones are not connected to
the surround amplifier. You cannot operate the
following Steps with the headphones connected.
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select
3
Press X/x to select [Audio Settings],
then press
4
Press X/x to select [Auto Calibration],
then press
The confirmation display for [Auto
Calibration] appears.
108
GB
[Setup].
.
.
5
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
COMPONENT VIDEO OUT VIDEO OUT
Y P B / P R /
C C
B R
VIDEO S-VIDEO
Y P / C P / C
B B R R
SAT/CABLE
LAN(100)
COMPONENT VIDEO IN
DC5V 500mA MAX
EXTERNAL
SPEAKER
FRONT FRONT
CENTER WOOFER
R L
L
A . C A
M I C
A C 2
E C M -
Calibration mic
6
Press X/x to select [OK].
To cancel, select [Cancel].
IR REMOTE
TV SAT/CABLE DIGITAL
OPTICAL
IN
COAXIAL
OUT IN
IN 1 IN 2 OUT
HDMI EZW-RT10
ANTENNA
75 COAXIAL
FM
TV R L A.CAL
MIC
AUDIO IN DMPORT
ECM-AC2
DC5V
700mA
R L
MAX
AM
AUDIO
VIDEO
SAT/CABLE IN
Ex. BDV-IT1000