Sony BDV-IT1000 Operating Instructions Manual page 42

Installing the speakers on a wall
Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
BDV-IT1000
1
Decide the installation of the speakers.
Recommended example:
Front View
Front left speaker (L)
Position the front speakers so that their centers align with the TV. Position the center speaker so
that the center of the speaker and the TV are aligned.
Top View
Front left speaker (L)
The surround speakers should be placed as high (or a little higher) than the front speakers.
Tip
• For details about positioning the speakers, see "Step 2: Positioning the System" (page 37).
42
GB
Center speaker
Front right speaker (R)
TV
TV
Front right speaker (R)