Sony BDV-IT1000 Operating Instructions Manual page 43

2
Decide the speaker position and mark the screw positions.
You need two screws (not supplied) for each bracket. The following indicates the narrower
positions of the two screws.
For the front/surround speakers
3
Remove the cover(s) from the speaker.
Pry up the cover by inserting a thin, flat object into the slit in the cover.
Front speaker
Note
• When assembling, take care not to touch the speaker unit.
565 mm
Cover
Slit
Surround speaker
For the center speaker
Center speaker
565 mm
43
GB