Sound/Speaker Settings - Sound - Sony XAV-W1 Operating Instructions Manual

External Video Setting
Item
Input (page 48)
Activates the video input from
the connected back camera/
navigation device.
Color System (page 48)
Changes the color system
according to the connected
back camera/navigation
device.
(SECAM is not supported.)
Back Camera Setting
(page 49)
* When a device is connected to BUS CONTROL IN, "Sony BUS" appears instead of "AUX 3," and only options
"Video" and "Audio" are selectable.
Sound/speaker settings — Sound
Select "SETUP" c "Sound" c the desired category c the desired item c the desired option. For details
on this procedure, see "Basic setup operation" on page 40.
Follow the page reference for details. "z" indicates the default setting.
Sound Setting
Item
EQ7 (page 29)
Dolby Pro Logic II (page 31)
Outputs 2-channel sources in
multi-channel.
Option Purpose
OFF (z) To deactivate the input.
Navigation To show the picture from
the navigation and output
the sound from the current
source.
Back Camera
To show the picture from
the back camera when the
back lamp lights up (or the
shift lever is set to the R
(reverse) position).
PAL To set to PAL.
NTSC (z)
To set to NTSC.
– –
Option Purpose
OFF (z) To cancel the equalizer
curve.
Xplod, Vocal, To select the equalizer
Edge, Cruise,
curve; customize the
Space, Gravity,
equalizer curve.
Custom
OFF (z)
To deactivate the Pro Logic
II mode.
Music To create deep, wide sound
for stereo audio recordings.
Movie To enhance the sound field
of stereo television shows
and all programs encoded
in Dolby Surround.
Unit status
Any status.
Unit status
During playback/
radio reception.*
During DVD/
VCD/CD/MP3
playback/radio
reception.* 1
continue to next page t
1
43