Dimensional Drawing & Centre Of Gravity; Dimensional Drawing - Daikin VRSIII-S Series Technical Data Manual

6 Dimensional drawing & centre of gravity

6 - 1 Dimensional drawing

FXMQ40P
20-ø 4.7 hole
(All around)
Air Outlet
Inspection hatch 450 or more
Air outlet
Ceiling
FXMQ50,63,80P
30-ø 4.7 hole
(Suspention bolt position)
(All around)
Air Outlet
(service space)
Inspection hatch 450 or more
Air outlet
Ceiling
140
• Indoor Units • CONCEALED CEILING UNIT • FXMQ-PVE
1
2
3
(Suspention bolt position)
Air Inlet
26-ø 4.7 hole
(All around)
700 or more
(service space)
Air Inlet
(Note 2)
14 - 8x12 oblong hole
Floor surface
36-ø 4.7 hole
(All around)
Air Inlet
700 or more
300 or less
Air Inlet
(Note 2)
Floor surface
®
• VRV Systems • Indoor Units
NOTES
Location of MANUFACTURE'S LABEL: Control box
surface
Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or more)
Do not locate things should not be wet under the indoor
unit.
Dews may droop when humidity reaches over 80%, or a
drain gets stuck, or air filters are not clean.
12 - 8x12 oblong hole
(All around)
Inspection hatch
View
(From the Air Outlet)
300 or less
(All around)
(From the air inlet)
NOTES
1 Location of MANUFACTURE'S LABEL: Control box
surface
2 Mount the air filter at the suction side.
(Select its colorimethod (gravity method) 50% or
more)
3 Do not locate things should not be wet under the
indoor unit.
Dews may droop when humidity reaches over 80%,
or a drain gets stuck, or air filters are not clean.
16 - 8x12 oblong hole
(All around)
Inspection hatch
View
(From the Air Outlet)
18 - 8x12 oblong hole
(All around)
(From the air inlet)
4 Space for Service Works
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1) One inspection hatch (450x450) on the control box side and a space of 300mm or
more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two) inspection
hatches under the unit (Arrow view B-1)
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
<Inspection hatch>
(Ceiling opening)
Control box
Control box
Ceiling
Ceiling
Inspection hatch
Inspection hatch (°450) Inspection hatch (450mmx450mm)
Control box
Control box
Inspection hatch 3
Control box
Air
Air
inlet
outlet
Fig. A or more
Inspection hatch 2
View B-1 View B-2
12 Drain hose (accessory)
11 Socket (for maintenance)
10 Hook
9 Air suction flange
8 Air discharge flange
7 Power supply connection
6 Interunit wiring connection
5 Control box (inside)
4 Ground terminal (in control box)
3 Drain pipe connection
2 Gas pipe connection
1 Liquid pipe connection
ITEM PART NAME
4 Space for Service Works
According to any one of below 1) - 3), secure a space for service works, such
as, checking and maintenance of control box and drain pumps, etc.
1) One inspection hatch (450x450) on the control box side and a space of
300mm or more under the unit. (Fig.A)
2) One inspection hatch (450x450) on the control box side and 2 (two)
inspection hatches under the unit (Arrow view B-1)
3) 3 (three) inspection hatches under the unit and the control box. (Arrow view B-2)
<Inspection hatch>
(Ceiling opening)
Control box Control box
Ceiling
Ceiling
Inspection hatch
Inspection hatch (°450) Inspection hatch (450mmx450mm)
Control box
Control box
Inspection hatch 3
Control box
Air
Air
outlet
inlet
Fig. A or more
Inspection hatch 2
View B-1
View B-2
12 Drain hose (accessory)
11 Socket (for maintenance)
10 Hook
9 Air suction flange
8 Air discharge flange
7 Power supply connection
6 Interunit wiring connection
5 Control box (inside)
4 Ground terminal (in control box)
3 Drain pipe connection
2 Gas pipe connection
1 Liquid pipe connection
ITEM PART NAME
O.D. ø 32 (outlet)
VP25 (O.D. ø 32 /I.D. ø 25)
For M10
M4
VP25 (O.D. ø 32 /I.D. ø 25)
ø 12.7 flale connection
ø 6.4 flale connection
REMARK
3D060160
O.D. ø 32 (outlet)
VP25 (O.D. ø 32 /I.D. ø 25)
For M10
M4
VP25 (O.D. ø 32 /I.D. ø 25)
ø 15.9 flale connection
ø 9.5 flale connection
REMARK
3D060161