Setting The Time; Time Display; At The End Of The Duration - Miele H 2265-1 BP Operating And Installation Instructions

Setting the time

The time of day is set in segments:
– For the time of day and cooking dura-
tions, first the hours, then the
minutes.
– For a minute minder duration, first the
minutes, then the seconds.
 Confirm with OK.
The respective functions appear de-
pending on the position of the function
selector (, ,  or ).
 Highlight the function you want using
the  or  sensor control.
The appropriate symbol will flash for
approx. 15 seconds.
 While the symbol is flashing, confirm
with OK.
The function is accessed and the left-
hand numeric block will flash.
You can only set the time while the nu-
meric block is flashing. If the time has
elapsed and the numeric block is no
longer flashing, you have to access
the function again.
 Use the  or  sensor control to set
the value you want.
 Confirm with OK.
The right-hand numeric block will flash.
 Use the  or  sensor control to set
the value you want.
 Confirm with OK.
The time has now been saved.

Time display

The symbols  and  or  will show
if you have set times.
If you are using the minute minder ,
cooking duration  and end of cooking
duration  functions at the same time,
the last time that you set will be shown.
If you have set a cooking duration, the
time of day will not be displayed.

At the end of the duration

When a duration has elapsed, the ap-
propriate symbol will flash and a buzzer
will sound if the buzzer is switched on
(see "Clock/timer – Changing settings").
 Confirm with OK.
The buzzer will stop and the symbols in
the display will go out.
Clock/timer
37