Table of Contents
Advertisement
While the triangle V is flashing,
change the selected setting with the O
or P button:
– Pressing the P button increases the
time.
– Pressing the O button reduces the
time.
The triangle V will flash for approx.
5 seconds.
Settings can only be changed using
the O or P buttons whilst it is
flashing.
If this period has elapsed, you will
need to call up the required symbol
again with the Q button.
Times change in minute units with each
press of the O and P buttons.
Touching the button for longer speeds
up the change in the display.
Setting the time of day
After connecting the appliance to
the mains supply or after a power
cut, "I2:00" flashes in the display.
The time of display can only be set
when the function selector is in the
"0" position.
^ Turn the function selector to "0".
i3:23
l m
V
^ Touch the Q button repeatedly until
the triangle V is underneath the m
symbol.
^ While the triangle V is flashing, enter
the hours with either the O or P
button and confirm with the Q button.
The minutes and the triangle V will
flash.
^ Now the minutes can be set by
pressing either the O or P button
and confirming with the Q button.
Once the m symbol goes out, the time
has been set and the colon will then
flash permanently.
Clock timer
17
Advertisement
Table of Contents
