B-2
Worksheets
Port PRT1 Configuration
(Jumper JW1)
Publication 1746-UM004B-EN-P - December 2005
What to Do Next
Give a copy of this worksheet to the hardware installer. Store this
worksheet with your application program for future reference.
See Figure 3.1 for the locations of the four jumpers.
See Figure 3.2 for jumper JW1 pin assignments and settings.
Specify the configuration of port PRT1 on your module by filling in
the table below.
Port
Configuration
PRT1
RS-232/423
RS-422
RS-485
What to Do Next
Give a copy of this worksheet to the hardware installer. Store this
worksheet with your application program for future reference.
Selection
Corresponding Jumper Position on JW1
Across pins 1 and 2, 3 and 4
Across pins 5 and 6, 7 and 8
Across pins 7 and 8, 9 and 10