Table of Contents
Advertisement
HARDWARE INSTALLATION
Frequently Asked Questions (FAQ)
Question 1: How do I clear CMOS?
W-615
Answer: To clear CMOS, do the following:
RemarkG:
JP4: Clear CMOS Contents
1 2 3
1. Turn off power and pull out the power cord.
2. Insert the jumper cap to clear CMOS PIN and remove the jumper cap
from clear CMOS PIN. (Remark)
3. Switch on the power again.
4. Press F2 to enter CMOS setting and load optimized defaults.
5. Save changes and reboot the system.
Pin 1-2 Short/Closed
Pin 2-3 Short/Closed
Normal
Clear CMOS
32
Chapter 4
Advertisement
Table of Contents
Need help?
Do you have a question about the Wonder Series and is the answer not in the manual?
Questions and answers