Removal And Replacement Procedures; Tablet Component Replacement Procedures; Back Cover - HP X2 210 G2 Maintenance And Service Manual

5

Removal and replacement procedures

This chapter provides removal and replacement procedures for authorized service provider only parts.
CAUTION:
provider. Accessing these parts can damage the tablet and void the warranty.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.

Tablet component replacement procedures

There are as many as 19 screws that must be removed, replaced, and/or loosened when servicing the tablet.
Make special note of each screw size and location during removal and replacement.

Back cover

Description
Back cover
Silver HP x2 and HP x2 210 G2 models
White HP x2 models
Red HP x2 models
Display panel
Silver HP x2 and HP x2 210 G2 models
White HP x2 models
Red HP x2 models
Display cable
Before disassembling the tablet, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the back cover:
CAUTION:
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel assembly.
22 Chapter 5 Removal and replacement procedures
Tablet components described in this chapter should only be accessed by an authorized service
Before turning the display panel assembly upside down, make sure the work surface is clear of
Spare part number
902342-001
902343-001
902344-001
902380-001
902381-001
902382-001
902354-001