CommScope Era M0201AKB_uc Installation Manual page 31

Do the following to mount the CAP H in the Wall Mount Bracket.
5
Hang the CAP H in the upper bracket.
a
Push the CAP H into to the lower bracket (A), and then fasten it to the lower bracket using two M8x20
b
screws (B), split-lock washers (C) and flat washers (D) so that the flat washers are against the
mounting bracket; torque to 27 N-m.
M0201AKB_uc
© January 2019 CommScope, Inc.
™
CommScope Era High Power Carrier Access Point Installation Guide — Preliminary
Installing a CAP H
A
B
C
D
Page 27