CAP H Overview
CAP H Connectors and Status LED
The CAP H connectors and Status LED are described in the following sections:
"Connectors and Status LED on Models with One Antenna" on page 6
•
"Connectors and Status LED on Models with Two Antenna Connectors" on page
•
Connectors and Status LED on Models with One Antenna
Figure 2
shows the connectors on an AC version of the CAP H that has one antenna connector.
•
Table 2 on page 7
•
STATUS LED.
Figure 3 on page 8
•
Do not remove caps from any of the connectors until instructed to do so.
8
7
Figure 2. Location of Connectors and LED on AC Version with One Antenna Connector
™
CommScope Era
High Power Carrier Access Point Installation Guide — Preliminary
Page 6
maps the callouts in
Figure 2
shows the connectors on a DC version of the CAP H that has one antenna connector.
and
Figure 3 on page 8
9.
and describes the connectors and
1
2
3
4
5
6
M0201AKB_uc
© January 2019 CommScope, Inc.