Related Manuals for Qtx TETRA
Summary of Contents for Qtx TETRA
- Page 1 TETRA 4-in-1 LIGHT EFFECT Item ref: 151.608UK User Manual Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
-
Page 2: Safety Symbol And Message Conventions
Introduction Thank you for your purchase of the QTX TETRA light effect. This model can deliver an extra wide array of colourful projections coupled with powerful UV/strobe and laser effects. Please read and keep this user manual to get the best from your purchase and avoid damage through misuse... -
Page 3: Rear Panel
If the TETRA is to be operated by DMX control, connect the DMX control signal to the DMX IN connector using an XLR lead and connect further DMX fixtures being controlled from the DMX OUT connector. -
Page 4: Stand-Alone Operation
Mic sensitivity Standalone operation As described in the menu above, the TETRA can be operated in standalone mode by setting the operation of water effect, fireball, UV and white flood/strobe LEDs. Various preset, auto and sound-activated modes can also be accessed using the I.R. -
Page 5: Dmx Operation
Set the DMX start address of the TETRA and all other lighting fixtures in the chain to accommodate all the required channels for each. The TETRA has 11 DMX channels and the table below is described with the DMX start address set to ... -
Page 6: Specifications
Specifications Power supply 110-240Vac, 50/60Hz (IEC) Power consumption Fuse rating LED: power 6 x 3W moonflower, 4W RGBW ripple, 4 x 2W UV/Strobe Laser power 30mW + 100mW (green + red) Laser colour Green (523nm), red (650nm) Laser class DMX connection XLRM in, XLRF out DMX channels Dimensions...