Page 1
B12P Item ref: 154.013UK Rechargeable Mini PAR Light User Manual Version 1.0...
Page 2
Damage caused by misuse is not covered by the warranty Thank you for choosing the B12P as part of your light show. The B12P is a compact DMX fixture which has been designed to be versatile enough to use as a standalone unit or as part of a larger DMX installation.
The B12P is fitted with an internal rechargeable battery, which when charged will operate the B12P for up to 4 hours without connection to external power.The B12P is also supplied with a DC power adaptor which connects to the unit via a DC jack on the rear panel (1).
DMX Connection The B12P has a male XLR and female XLR on the rear panel (1, 4) for DMX512 control or connection to other B12P units for Master/Slave operation. Connect in sequence from female XLR to male XLR using good quality 3-pin XLR leads which are suitable for DMX.
A B12P fixture operating in one of the standalone modes may be connected onto further B12P units by DMX lead (XLR-XLR) as a master unit. The slave units must be set to “IP” mode to mimic the operation of the master unit.
Specifications Power supply 12.6Vdc (mains adaptor included) No. of LEDs LED type 1W single colour Beam angle 25° Modes DMX512, Master/Slave, Auto, Sound active, IR remote DMX channels Battery 11.6V 2000mAh Li ion Battery life 3 - 4 hours Recharge time 5 hours Dimensions 90 x 120mmØ...