Page 1
PAR12 Item ref: 154.033UK 3 x 4W RGBW LED PAR Light User Manual Version 1.0...
Page 2
Damage caused by misuse is not covered by the warranty Thank you for choosing the PAR12 as part of your light show. The PAR12 is a compact DMX fixture which has been designed to be easy to set up as a small light show but with enough features to integrate into larger installations.
LED display Power cable DMX output XLR Menu buttons Internal Settings Using the menu buttons (5) the PAR12 can be set to run in various modes. These are outlined in the table below. Function Display Press Up/Down Press Enter + Up/Down .
DMX Connection The PAR12 has a male XLR and female XLR on the rear panel (1, 4) for DMX512 control or connection to other PAR12 units for Master/Slave operation. Link in sequence from DMX OUT to DMX IN connectors using good quality 3-pin XLR leads which are suitable for DMX.
A PAR12 fixture operating in one of the standalone modes may be connected onto further PAR12 units by DMX lead (XLR-XLR) as a master unit. The slave units must be set to “IP” mode to mimic the operation of the master unit.
Specifications Power supply 100 - 240Vac, 50/60Hz (IEC in & through) Power consumption LEDs 3 x 4W RGBW Connections IEC in/out, DMX in/out (XLR) Operating temperature range -20 to +40°C DMX channels Beam angle 25° Dimensions 120 x 115 x 110mm Weight 408g Disposal: The “Crossed Wheelie Bin”...