Advertisement
Quick Links
Advertisement
Related Manuals for Qtx SW-2
Summary of Contents for Qtx SW-2
- Page 1 SW-2 SNOW MACHINE Item ref: 160.565UK User Manual...
- Page 2 To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture. If liquids are spilled on areas other than the fluid tank or nozzle, disconnect the mains, allow the SW-2 to dry out and have it checked by qualified personnel before further use.
-
Page 3: Rear Panel
7. Fluid level indicator Setting up The SW-2 requires snow fluid, which forms small foam drops to create the snow effect. It is recommended to use qtx snow fluid for best results (160.578, 160.579) A chart for recommended fluids is included further along in this document. -
Page 4: Dmx Operation
Make sure that the remote control rocker switch (11) is set to the “off” position at startup Switch the mains power on (4) at the rear of the unit And the power indicator (10) will light Set the output control (8) to the lowest setting and switch the rocker switch on ... -
Page 5: Troubleshooting
Troubleshooting Check mains voltage is correct and socket is switched on Check IEC lead is OK and connected properly No light on mains switch Check mains fuse in IEC connector and fuse in plug top If fuse blowing repeatedly, refer to qualified service personnel No power light on remote Check remote control is connected properly Check snow fluid level... - Page 6 160.565UK User Manual...