Related Manuals for Qtx ZEPHYR
Summary of Contents for Qtx ZEPHYR
- Page 1 ZEPHYR Item ref: 160.464UK User Manual Compact Haze Machine Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 No user serviceable parts inside - do not open the case. Allow the ZEPHYR to acclimatize to room temperature before operating. Placement The ZEPHYR has a built-in fluid container and should be operated in an upright position. Ensure that the ZEPHYR is positioned on a stable, non-slip surface. Safety •...
- Page 3 Recommended fluid For the ZEPHYR haze machine, we strongly recommend the following fluid which has been specifically formulated to perform best with any heater based haze machines. QTX ref code Description Size 160.591UK High quality professional haze fluid 5 Litre 160.596UK...
- Page 4 DMX OUT XLR connector. Connect the IEC mains plug and switch the power on. Heat up time is as little as 35 seconds before the ZEPHYR is ready to use. Operation To operate the ZEPHYR in standalone mode, use the 4-button control on the rear panel beneath the LED display as follows.
-
Page 5: Specifications
Specifications Power supply 230Vac, 50Hz (IEC) Power 300W Tank capacity 1.2 litre Haze output (approx.) 3,000 CuFt (68m²) per minute Reheat time 35 seconds (min.) Controls Output (0-255), Fan speed (0-255) Fuse F3AL 250V Remote control RF keyfob & receiver (5-pin DIN) Remote control frequency 433MHz DMX channels... - Page 6 160.464UK User Manual...
Need help?
Do you have a question about the ZEPHYR and is the answer not in the manual?
Questions and answers