The Spindle As - Milwaukee 5339-20 Repair Instructions

REPAIR
INSTRUCTIONS
1
Disassembling Remove thrust collar (1) from spindle (4).

the spindle as-

Remove O-ring (2) from thrust collar (1).
sembly
2
Remove ram assembly (5) from spindle
(4) by tapping it lightly with a plastic face
hammer.
Remove O-ring (6) from ram (5).
3
Remove retaining ring (3) from spindle.
1
Disassembling Remove following parts from spindle (D):
the spindle as-
– roller race (1)
sembly
– washer (2)
– o-ring (3)
– attachment washer (4).
2
Remove four rollers (C) with a magnetic
screwdriver from spindle (D).
In case of stiffness, remove rollers (C)
with light taps with a plastic face ham-
mer. Twist the spindle and driver back
and forth while tapping to aid in easy
roller removal.
3
Remove striker guide (5) from spindle (D).
4
Remove striker (7) and o-ring (6) from
striker guide (5).
5
Remove three o-rings (8) from striker (7).
6
Remove thrust collar (9), pressure o-ring
(A), and washer (B) from spindle (D).
2
1
4
3
4
3
2
1
8
7
6
5
D
C
B
A
9
PAGE
6
58-92-5305 d1
6
5