Milwaukee 5339-20 Repair Instructions page 5

REPAIR
INSTRUCTIONS
1
Removing the Remove adjusting plate assembly (4) from
lever pin (2) located on lever (1).
2
Squeeze spring (5) together at the bottom
side of lever (1) and remove lever from
gear box cover.
3
Remove O-ring (3).
When removing adjusting plate (4)
from pin (2) take care to not bend
spring assembly.
1
Combined
Loosen spindle assembly (1) by turning it
slightly and pulling it from the front of the
drill/chisel
gear box (in direction of arrow).
hammer:
In case of stiffness, lightly tap gear box
(2) with a plastic face hammer. Spindle
Removing
assembly (1) will be released in direc-
spindle assembly
tion of arrow.
1
Chisel Remove retaining ring (3) using retaining
ring pliers from spindle groove.
hammer:
2
Loosen spindle assembly (5) by turning it
slightly and pulling it from front of gear box
Removing
(in direction of arrow).
spindle assembly
In case of stiffness, lightly tap gear box
(4) with a plastic face hammer. Spindle
(5) will be released in direction of ar-
row.
3
Remove retaining ring (3), washer (2) and
O-ring (1) from gear box (4).
5
1 2
1 2 3
4
5
PAGE
5
58-92-5305 d1
1
2
3
4