Table of Contents
Advertisement
Problem
The oven does not heat up
A noise can be heard after a
cooking programme
The side lighting is not working
Cakes and biscuits are browning
unevenly
A fault code appears in the
display:ER + a number
Possible cause and remedy
The oven may not be switched on. Switch the oven on.
The clock may not be set. Set the clock.
Check to see if the required settings have been applied.
A household fuse may have blown or a circuit breaker
may have tripped. Replace the fuses or reset the circuit. If
this happens repeatedly, call an authorised electrician.
The cooling fan remains switched on after the end of a
cooking programme.
Disconnect the appliance from the electricity supply:
• Switch off and unplug at the socket, or disconnect
the fuse, or switch off at the isolator as appropriate.
• Remove the shelf runners.
• Remove the lamp cover.
• Replace it with a new halogen lamp. Refer to page
"Changing the bulb" on page 38.
• Push the lamp cover back into its retainers, and
replace the shelf runners.
• Reconnect the appliance to the mains electricity
supply.
There will always be a slight unevenness. If browning is
very uneven check that the correct temperature was set
and that the correct shelf level was used.
ER 3 or ER 4: Temperature sensor error, you can call local
service centre
ER 0: Communication failure,you can call local service
centre
40
Advertisement
Table of Contents
