Sheet Info - Relay PadPuls M1 User Manual

3.3 Sheet Info

This sheet shows some photos of supported M-Bus devices from the product range of the Relay
GmbH, the PadMess GmbH and further manufacturers. Here are also links to our Internet page,
from which the current version of the program can be downloaded, and to the email address for
criticism and suggestions to the program.
The lower third of this card is likewise visible in every other card. Here the following input fields
and buttons are always attainable:
COM-Port is the serial port of the PC to which the M-Bus level converter is
connected. The selected port will be saved in an INI file and will be
restored on startup. Therefore the COM-Port has to be configured only
once.
Baudrate is the transmission speed of the serial port of the PC used for
parameterization. Possible selections for this used M-Bus baudrate are
300, 2400 or 9600 baud. Attention: Baudrates of more than 2400 baud are
not supported by all M-Bus level converters which are available on the
User Manual PadPuls PadPuls M1 · 10/2018 · VERSION 1.4
PadPuls M1
7