Table of Contents
Advertisement
market! The selected baudrate must be identical to the baudrate of the
M-Bus device. (see: "New M-Bus Baudrate"). The PadPuls M1 supports all
three baudrates.
New M-Bus
allows reprogramming the baudrate of the M-Bus device. The new
Baudrate
baudrate is sent to the M-Bus device after a change in the appropriate
selection box. If the M-Bus slave accepts this command, it acknowledges
the telegram with the single character „$E5" ($ for hexadecimal notation)
using the old baudrate. Afterwards the device switches to the new
baudrate. This button is not needed for the PadPuls M1, because it
automatically detects the baudrate used by the master.
M-Bus Address
is the primary address of the connected M-Bus slave. In a direct
connection with only one slave you can use the broadcast address 254.
Using this address every M-Bus device must answer regardless of its own
address.
Connect
is used to request data from the slave. The type of device is then
automatically recognized. The items "Manufact.", "Generation", "Type" and
to meter
"M-Bus State" will then be refreshed. New sheets are generated
depending on manufacturer and type of the M-Bus device. A single sheet
appears in case of PadPuls M1.
Manufact.
is an item that shows the 3-letter manufacturer code after successful
reading ("Connect to meter"). This item is read only.
Generation
shows the revision connected M-Bus device. This item is read only.
Type
shows the type (here: PadPuls M1) of the connected device. This item is
read only.
M-Bus State
shows the M-Bus state of the connected device. This item is read only.
ZVEI optical
if this option is activated, devices with an optical interface and M-Bus
mode
protocol according to EN 1434-3 can be read and programmed using an
optical reading head.
MDK (Sensus)
This switch activates the readout with an MDK from Sensus.
Autom. readout
if this option is activated, the software always reads the data after writing
(useful for checking the correct programming).
User Manual PadPuls PadPuls M1 · 10/2018 · VERSION 1.4
PadPuls M1
8
Advertisement
Table of Contents
